Steeple Unvented Electric Water Heater

Our range of Steeple unvented units provide thermosatatically controlled hot water up to 68 degrees centigrade at main pressure. The smaller sized models can be mountedunder-sink or like the large units at any convenient place near the point of use. Also these units manufactured by Dimplex you can be sure you are also getting a top quality product

Features

• 7 litre, 10 litre and 15 litre capacity available.

Stainless steel cylinder with a 10 year guarantee. No anode to replace. Direct connection to main cold water supply. High water flow rates. Ideal for low volume frequent of irregular use applications. Incoloy elements. Small size allows easy positioning close to points of use applications. Pack includes 6bar isolating valve, wall mounting bracket, isolating valve

Installation Kits
Installation kits should be fitted to all units of 15 litres or less and in accordance with the details in the attached technical file. The installation will not comply with the water regulations if the correct kits are not fitted

• Pressure reducing kit


• Expansion Kit

• Mains Pressure: Max: 16bar static, Min: 1.5bar (performance reduces at lower pressures)


• Cylinder: 316L stainless steel


• Max working pressure: 6bar

Insulation: 30mm CFC injected foam

• Cold water inlet: 15mm stainless steel pipe


• Hot water inlet: 15mm stainless steel pipe

Be the first to review this product

No documentation available.