• Wiring Accessories
 » 
• MK wiring accessories
 » 
• MK MASTERSEAL 2G 13A RCD SOCKET

MK MASTERSEAL 2G 13A RCD SOCKET

Back to Category

MK Masterseal grey 13 Amp two gang IP56 RCD protected socket.

• 2 Gang DP
• 30mA Rated Tripping Current
• Active Control Circuit
• Surface Mounted
• RCD protected sockets are pulsating D.C. and A.C. fault current sensitive

Fixing holes are for No. 8 woodscrews (not supplied).Supplied with an earth terminal and a loop terminal in the back box.This socket has five entries. stable for supply voltage of 240V a.c. 50Hz.

DIMENSIONS: 175 x 115 x 80mm
BS 7288: 1990
BS 1363 Pt.2: 1995

IMPORTANT
Active Control Circuit Incorporates a ‘RE-SET’ mechanism  and is mains failure sensitive, i.e. it will  function under all normal conditions  expected of an RCD but it will also trip  in the event of a power cut. Ideal where hazardous equipment may suddenly energise after a power cut, such as rotating machinery and heat developing apparatus.

Masterseal enclosures are manufactured from polycarbonate. This provides an extremely high level of impact resistance. However some chemicals and synthetic oils can harm polycarbonate. Refer to MK Technical Services for assistance on 01268 563720

Manufacturer
MK Electric

Product Code
56231GRY