• Wiring Accessories
 » 
• Outdoor Sockets, Switches and Timers
 » 
• MK MASTERSEAL 1G RETRACT SWITCH

MK MASTERSEAL 1G RETRACT SWITCH

Back to Category

MK Masterseal 1 gang 10amp rated retractive switch

• 10 amp 1 gang
• Single Pole Two-way
• push to make or push to break
• Marked  'Press'
• IP56 Rated

Fixing holes are for No:8 woodscrews (not supplied).Each switch is fitted with a neon which can be wired as a locator. The enclosure has 4 x 20mm entries, 1 on each edge and is supplied with an earth terminal and a loop terminal in the back box. These switches (except push switches) do NOT have to be derated when used with fluorescent or inductive loads.

• Dimensions:: 95 x 95 x 57mm
• BS.3676 Pt.1: 1989
• IP56 to BS EN 60529

Masterseal enclosures are manufactured from polycarbonate. This provides an extremely high level of impact resistance. However some chemicals and synthetic oils can harm polycarbonate. Refer to Technical Services for assistance 01268 563720

Manufacturer
MK Electric

Product Code
56408GRY