Unvented & Cistern water heaters

10L UNVENTED WATER HEATER

Back to Category

10 Litre unvented water heater

Our range of Steeple unvented units provide thermosatatically controlled hot water up to 68 degrees centigrade at main pressure. The smaller sized models can be mountedunder-sink or like the large units at any convenient place near the point of use. Also these units manufactured by Dimplex you can be sure you are also getting a top quality product

Features

• 10 Litre capacity.
• Stainless steel cylinder with a 10 year guarantee.
• No anode to replace.
• Direct connection to main cold water supply.
• High water flow rates.
• Ideal for low volume frequent of irregular use applications.
• Incoloy elements.
• Small size allows easy positioning close to points of use applications.
• Pack includes 6bar isolating valve, wall mounting bracket, isolating valve

Installation Kits

Installation kits should be fitted to all units of 15 litres or less and in accordance with the details in the attached technical file. The installation will not comply with the water regulations if the correct kits are not fitted

• Pressure reducing kit
• Expansion Kit

Dimensions

• Mains Pressure: Max: 16bar static, Min: 1.5bar (performance reduces at lower pressures)
• Cylinder: 316L stainless steel
• Max working pressure: 6bar
• Insulation: 30mm CFC injected foam
• Cold water inlet: 15mm stainless steel pipe
• Hot water inlet: 15mm stainless steel pipe

Manufacturer
Dimplex - Branded Steeple

Product Code
UNVEN10/N