• Fans & Ventilation
 » 
• Extractor Fans
 » 
• VENT AXIA 9INCH WALL FAN

VENT AXIA 9INCH WALL FAN

Back to Category

Vent Axia 9inch commercial wall fan

The proven Standard range wall models are designed to fit flush into most double brick walls using the rigid wall liner supplied with the unit. Provision is made within the liner for conduit entry. When installed, only the ivory fascia is visible on the internal wall face. The external weather louvre fits flush to the outside. A shutter is available as an accessory which can be easily fitted within the unit, see below.

On new building work the installation and wiring of the wall liner can be completed prior to the final installation of the unit and controller. Fully shrouded connectors on the fascia automatically connect the wiring to the motor when fitted to the wall liner.

The Rangemaster controller is recommended for use with this model to provide full function control of the fan plus the option of sensor mode using a selection of electromechanical switches to provide automatic switching of the fan. Alternatively, single speed extract is achieved using a normal On/Off switch.

• Type: S9/WL
• Stock Reference: 133510A
• Amps @ 240V: 0.24
• Max Extract Performance: 856m³/h
• Max Wattage: 53W
• Sound Pressure level: 43dB(A) (med) @ 3m

Manufacturer
Vent Axia

Product Code
S9WL